PRO Controllers installation instructions
Follow the steps below to activate the programming mode of your PRO Controller:
Step 1: Turn on your PRO Controller and connect the Controller with your PlayStation 4.
Step 2: Activate the programming mode. This is possible in two ways:
A: Through the indicator light:
Place your finger on the indicator light for at least 5 seconds. The indicator light turns blue when the programming mode is active.
B: L1 + R1 + DOWN + X
Press and hold the button combination for at least 5 seconds. The blue indicator light comes on when the programming mode is active.
Step 3: When the programming mode is active, the blue indicator remains lit. Now it is possible to assign action buttons. See the example below:
Example: Assign O to button K2.
Press action button O and button K2 for at least 3 seconds. When the pairing is successful, the blue indicator light flashes 3x. If the pairing has failed, the indicator light turns red. In this case, try again.
The following buttons can be assigned to K1, K2, K3 and K4.
Step 4: When you have finished programming the buttons, exit the programming mode in the same way as in step 2.
ADDITIONAL: To delete all assigned buttons at once, hold down the following buttons for 5 seconds until the red indicator light flashes 3x:
UP + LEFT + TRIANGLE + CIRCLE + L1 + R1
If, after reading our instructions, you still have questions, please do not hesitate to contact us via customer service.